Hello! I'm working with MSP-EXP432P401R Rev 2.0 Launchpad and Fuel Tank MKII Battery BoosterPack Plug-In Module. Initially, I run the BOOSTXL-BATPAKMKII_FuelGauge_MSP432P401R example and it worked fine. After a few days, I run again the example and I get the following output:
*************************************
Initializing BQ27441 Configuration
*************************************
DesignCapacity = 1200mAh
DesignEnergy = 1200mAh * 3.7 = 4440J
TerminateVoltage = 3200mV
TaperRate = 1200mAh/(0.1*115mA) = 104
Error initializing BQ27441 Config
Make sure BOOSTXL-BATPAKMKII is connected and switch is flipped to "CONNECTED"
Clearing BIE in Operation Configuration
Clearing BIE in Operation Configuration
Clearing BIE in Operation Configuration
And it gets stuck at "Clearing BIE in Operation Configuration". I've tried reprogramming, disconnecting/connecting the USB cable, flipping the switch many times, but without success. I mention that the battery is connected and fully charged. Also, I'm using MSP432Ware v3.5/MSP432 DriverLib v3_21.
Does anybody know what is the problem?
Thank you,
Cristian M.