MSP430FR60371: ADC Speed
Part Number:MSP430FR60371Hi Team,my customer is looking for an MCU with a 12bit, 5MSPS ADC, as well as DMA Channels. The FR60371 seems to only be 1MSPS, correct?Do we have anything in our portfolio...
View ArticleCC430F5137: RF1A library strobe() causing OPERR
Part Number:CC430F5137Hi,I work with cc430f5137 for a wireless communication project. After I have used strobe function within SLAC525B/HAL/RF1A.c to send command, OPERR error flag occurs in RF1AIFERR...
View ArticleCCS/MSP430F6726: MSP430F6726 I2C CUSTOMIZED BSL
Part Number:MSP430F6726Tool/software: Code Composer StudioI am trying to make customized I2C BSL for MSP430F6726, i have found some sample code from here(http://www.ti.com/tool/MSPBSL) for reference....
View ArticleMSP430FR5739: MSP430FR5739
Part Number:MSP430FR5739I am a test engineer that is adding a boundary scan test to test your MSP430FR5739IRHAR device on our circuit cards developed by our design team. I am requesting a link or...
View ArticleCCS/MSP430F2274: Why is this random number generator function not returning...
Part Number:MSP430F2274Tool/software: Code Composer StudioI have a function which uses the `rand()` function to get a pseudo-random number and is supposed to return the value back to an assigned...
View ArticleMSP430FR5739: MCU start-up
Part Number:MSP430FR5739What does the MCU do during the start-up, i.e. them time between the MCU is powered and the user program starts running? Why this time varies from one program to another? Is...
View ArticleCCS/LDC1041EVM: Issue with MSP432
Part Number:LDC1041EVMTool/software: Code Composer StudioHi,My issue with the MSP432 and the LDC1041 wasn't resolved. Do you have a sample of code that could help me manage to use the LDC1041? I didn't...
View ArticleClik here to view.
[FAQ] MSP430FR4133: Production Issue - Male BoosterPack Headers Missing
Part Number:MSP430FR4133We have discovered an issue on some MSP-EXP430FR4133 LaunchPad where the male pins on the J1, J2, and J3 headers (the BoosterPack headers) were clipped off during manufacturing....
View ArticleMSP430FR5994: Are the UART UCTXIFG and UCTXCPTIFG flags set together?
Part Number:MSP430FR5994Hi All,It is important to note that UCTXCPTIFG is broken as described by USCI42 stating: "UCTXCPTIFG flag is triggered at the last stop bit of every UART byte transmission."If...
View ArticleCCS/MSP430FR2000: Issues with LPM3.5
Part Number:MSP430FR2000Tool/software: Code Composer StudioHello,When the code starts I am planning to turn ON a switch (at P1.7). Then an interrupt at P1.3 should OFF the switch and turn ON RTC. With...
View ArticleMSP430FR2522: CapTIvate Proximity Battery System very low sensing distance
Part Number:MSP430FR2522Hello,in our HMI we're using a CapTIvate Proximity Sensor.The size of our panel is 7cm x 7cm and battery-driven (3x 3V button cell)I've attached a drawing of the panel.Our goal...
View ArticleMSP430F5659: MSP430F5659 reserved pins
Part Number:MSP430F5659Hello TI Experts, I have got a question from the customer about the reserved pin of MSP430F5659.Would you please check the following question and give any comment or your...
View ArticleClik here to view.
CCS/MSP430FG4618: P2.0 behavior is different prior to main() with and without...
Part Number:MSP430FG4618Tool/software: Code Composer StudioAfter reset, P2.0 behavior is different prior to main() with and without with a MSP-FET powered/attached. (without = un-powered or not...
View ArticleMSP430G2553: Reset Falling Voltage and the MCU can't be programed
Part Number:MSP430G2553Hi everybody,I made two PCB for the MCU MSP430G2553 in TSSOP package (28 pins) in both cases I have these issues:1. Reset Falling Voltage. I saw the signal in an oscilloscope and...
View ArticleMSP430G2553: Maximum current for msp430g2553
Part Number:MSP430G2553Hello, I am designing a solar power circuit to run an msp430g2553 chip. What is the maximum current I can give to the circuit without causing damage?Thanks.
View ArticleEVM430-F6736: Error: Could not find MSP-FET430UIF on specified COM port :...
Part Number:EVM430-F6736Hi all,I work on an EVM430-F6736 energy meter module. I have downloaded the slaa517e zip file and have rebuilt emeter-toolkit ad emeter-ng projects.I use an MSP-FET430UIF...
View ArticleMSP430FR5870: Change DCO frequency?
Part Number:MSP430FR5870Hi,I am currently migrating to the 'new' FRAM devices. Maybe I am overlooking something, but is it correct that it is not possible in at least some devices to tune the DCO to a...
View ArticleMSP430F6746: Questions about DLMS
Part Number:MSP430F6746Hi everyoneGood afternoonWe have some questions about DLMS Library : DLMS_OBJ_5_4x_Alpha_with_EventPush1. Does the Texas DLMS library support DLMS/COSEM security suite id 0?2....
View ArticleMSP-EXP430G2: UCBRSx
Part Number:MSP-EXP430G2Can anybody explain the actual use of UCBRSx bits in the UCAxMCTL, USCI_Ax Modulation Control Register, what it mean by this first stage and second stage modulation,UART is...
View ArticleMSP432P401R: SPI pins
Part Number:MSP432P401RHi, I am working on MSP432P401R& I need four different SPI channels but I found few dedicated pins are missing on board like P1.0, P1.1, P1.2, P1.3, P2.0, P2.1, P2.2, P3.1...
View Article
